Edge protector model ZGZB-KS

Edge protector for lashing sensitive loads (cardboard boxes).

Edge protector profile

	- Manufactured from polypropylene or recycled cardboard, to protect edges of loads. - Length up to 4 m.

Load stabilizer bar model ZGZB-KBR

Load stabilizer bars are used to secure loads between bulkheads or between floor and ceiling.

Slip restraining mats model ZGZB-ARM

- Manufactured from compressed rubber granulate to achieve a defined friction coefficient of µ = 0.6. - Even if an emergency stop or evasive action is being taken – the cargo trucks or train wagons must not move. But only in very few cases the vehicle structure alone will offer sufficient load security. - For this reason, slip restraining devices should belong to the standard equipment of every professional transport. - Slip restraining mats will decrease the danger which emanates from plain loading platforms. They will reduce the required total pre-tensioning forces during over top lashing of loads and will contribute – together with the textile lashings – that the loads will form a single unit with the vehicle or wagon. - The slip restraining effect will benefit especially those products, which do not stand a high surface pressure. - The dangers resulting from incorrect load lashing practices are often underestimated. Acceleration forces in standard driving situations are close to the dead weight of the load!

The friction force FW of a slip restraining mat impedes load displacement and is physically explained as follows: FW = m x G G = Weight force m = Friction value The difference between inertial force F and friction force FW is called securing force FS. FS = F – FW The securing force FS is the strength which has to be absorbed by the safety devices.

Load binders model RLSP Lashing capacity LC 4000 - 10600 daN

- The load binder is a universal tool to restrain and secure loads and freight. Manual operation of the binder lever extends or retracts the threaded spindles. - Tension is upheld by the self-locking threads. - The load binder is fitted with shortening hooks for direct attachment to chains or with clevis ends for use with existing fastening devices.

Weld-on hooks model ASH Capacity 1000 - 8000 kg

- Weld-on hooks model ASH are universal attachments for use on trucks, excavators, low loaders and spreader beams, etc. The forged safety latch has high lateral stability and an ergonomic shape. Every weld-on hook has an identification number so that its history can be traced back through forging to the origin of the material. - The hook can be welded without any special preparation, e.g. prewarming. - The hook and safety latch are epoxy resin coated for added corrosion protection, the return spring is made from stainless steel.