Manifolds are used when several hydraulic cylinders have to be connected to one hydraulic pump. All manifolds are equipped with 3/8 NPT inner oil ports, so that fittings, hydraulic hoses and couplers can easily
be attached. To connect a manifold directly to a hand
pump a FY-1 double nipple is recommended. Each manifold is supplied with three steel blind plugs in case not all the oil ports are required.

       
      Manifolds with shut-off valves are used when different
pressures must be maintained in each hydraulic line
and therefore allow the lifting of unequal loads. The
manifolds are ready assembled and can be screwed
directly to a hand pump or power pack. Depending
on the way of assembly a short hose HHC-10 and a
coupler half CFY-1 can be helpful.
Manifolds models MY ... GYA are equipped with the
corresponding number of shut-off valves plus pressure
gauge sets (GYA-63) which allow a permanent
reading of each individual load.